MK4 Improved Y Axis Idler Mount - Helps Reduce Vertical Artifacts on Y Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An idler mount for the Y axis of the Prusa MK4 that helps align the idler horizontally.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 270
- Wydruki
- 10
- Wyświetlenia
- 1438
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
A quick modification I made to the stock idler mount for the Y axis that helps keep the idler perfectly horizontal and aligned to the belt by using two alignment tabs on the top on bottom of the part. These take up the slack that can allow the idle to be installed slightly out of level and contributing to horizontal artifacts on prints.
Two versions are offered, one that works with the standard smooth idler and one that works with a toothed idler. I recommend the toothed idler as they are generally preferential to smooth idlers in 3D printers.
I used this idler for my printer:
The print settings are the same as the original - 0.20mm STRUCTURAL
Recommend printing with PETG or (even better) ABS/ASA
Use in conjunction with my model for the Y axis motor mount for the best results.
MK4 Improved Y Axis Motor Mount - Helps Reduce Vertical Artifacts on Y Axis by KyleTW | Download free STL model | Printables.com