Double Dyson Angled Accessory Wall Mounted Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mounted holder that holds the angled soft brush tool and mini motorized tool from the Dyson V7 or newer
- Ocena
- 4,5 / 5
- Polubienia
- 16
- Pobrania
- 110
- Wydruki
- 3
- Wyświetlenia
- 711
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
A wall mount/holder for the mini motorized tool and the angled soft brush tool compatible with Dyson V7, V8, V10, and V11.
The mount has two 3.5mm (~9/64 inch) diameter holes for wall mounting screws. Do not over-tighten the mounting screws as doing so will crush the 3d printed part.
Supports are recommended for this print.
Fusion 360 (.f3d) and STEP files have also been included for anyone to edit.
This model is a modification of my original design which also had a third holder for one more tool, which can be found here: https://www.prusaprinters.org/prints/75292