Power Supply and Controller Wall Mounts for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to mount the PSU Model SOY-3600200US-306 and/or H705A/B/C Controllers on a wall or ceiling using screws
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 403
- Wydruki
- 1
- Wyświetlenia
- 1774
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The power supply mount is compatible with the 36V 2A PSU model SOY-3600200US-306 which comes with Govee RGBIC LED Permanent Outdoor Lights models H705A, H705B, and H705C. The controller mount is compatible with the aforementioned models.
I designed the power supply mount with an open style of frame to allow maximum cooling through free air convection. I recommend you print it with a tough, heat resistant plastic such as PETG with 20% gyroid infill. PLA is not recommended for permanent outdoor installation.
Enable supports when printing.
You can use screws up to imperial #8 (4.2 mm) to fasten the mounts to a wall or ceiling.
The FreeCAD .FCStd files are provided if you would like to change the dimensions or design of whatever you want. The step files are also provided if your slicer supports step files for better resolution.
My design is free for individuals to use for their own personal non-commercial usage. If you like my design and find it useful, a contribution made through Ko-fi or PayPal would be greatly appreciated!
Thanks for checking out my design and good luck on your project!