1 / 6
Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure For Prusa Bear - Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure For Prusa Bear Upgrade
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 3016
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (2)Kolekcje (63)Powiązane
This is a remix of my favorite Einsy + Raspberry Pi Case for the Prusa Bear Upgrade
This is still WiP, I have not tested it myself, but everything lines up in CAD and the changes are very minor. I will remove this warning once I test it.
Only the enclosure needed to be updated so it can be screw into the V-Slot with some t-nuts. Everything else is assembled the same way as the original from KalleKnall.
Needed hardware:
- 4 X M3 T-Nut
- 4 X M3 X 10 mm (Countersunk)
Todo:
- Make full hexagon pattern on side of case
- Test when Bear Upgrade is finished