HTC Vive controller wall mount and charging station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for an HTC Vive wand. It can also optionally be used a a charging dock at the same time.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 284
- Wydruki
- 3
- Wyświetlenia
- 1296
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount for an HTC Vive wand. It can also optionally be used a a charging dock at the same time.
It was inspired by the existing wall mount http://www.thingiverse.com/thing:1527199 which is also a remix of http://www.thingiverse.com/thing:1443154 like this one. In both cases I found the original models a bit too clunky for my taste so I wanted to slim it down somewhat. Unfortunately the wall mount didn't come with any designer files so I used the original stand and re-created the wall mount.
It still uses the same plugin parts for the different kinds of Micro USB connectors as the others though (see http://www.thingiverse.com/thing:1443154 for those).
This object can be used as part of my All-In-One HTC Vive Mount HMD + Controllers + charging mounting solution where you'll need only 3 screws to fasten the entire thing to the wall instead of the 6 needed if you mount every piece separately.
Print instructions
Printer Brand: Prusa
Printer: Prusa i3 MK2
Rafts: No
Supports: No
Resolution: .20
Infill: 20%
Notes:
Printed perfectly in PLA using Prusa's default NORMAL settings (with ZHop).
Post-Printing
The back plate has two holes for fixing the mount to a wall.
If used as part of my All-In-One HTC Vive Mount HMD + Controllers + charging mounting solution then you only need to use the top hole, otherwise you need to use both holes.