1 / 2
Klemme für 30mm Rohr / Clamp for 30mm tube — zdjęcie 1
1 / 2

Klemme für 30mm Rohr / Clamp for 30mm tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ergänze diese Klemme zu (nahezu jedem) 3D-Modell deiner Wahl, und du kannst es an ein 30mm-Rohr klemmen.

Ocena
0 / 5
Polubienia
6
Pobrania
54
Wydruki
0
Wyświetlenia
618
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

Mit dieser Klemme kann (nahezu) jedes 3D-Modell an ein 30mm-Rohr geklemmt werden. Verwende die doppelte Klemme für einen besonders guten Halt.

Die Druckdatei enthält nur die Klemme in einfacher und doppelter Anordnung.

Die doppelte Klemme wird durch eine 90°-Drehung am Rohr eingeklipst.

Passe die Größe an, um mehr oder weniger Klemmkraft zu erreichen. Die Größe in der Druckdatei erreicht einen strammen Sitz an einem 30mm Rohr.

 

Beispiele/Examples:

https://www.printables.com/de/model/758933-kaffebecherhalter-fur-notenstandernotenpult

https://www.printables.com/de/model/758580-kaffebecherhalter-fur-notenstandernotenpult

 

With this clamp, (almost) any 3D model can be clamped to a 30 mm tube. Use the double clamp for a particularly good hold.

The print file only contains the clamp in single and double arrangement.

The double clamp is clipped onto the pipe with a 90° turn.

Adjust the size to achieve more or less clamping force. The size in the print file achieves a tight fit on a 30mm tube.

Tagi