Hearing protection / headphone holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hearing protection or headphone holder which can store three piece of them in a row on small room.
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 195
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The hearing protection holder can be used to store three of them in a 90* angle to the wall for example in small lockers, cabinets or where its needed.
It can store hearing protections or headphones with a hanger width of max. 30-35 mm (depends on the shape). The width of the headphones can be up to 100 mm.
In total the model is 245x60x55 mm big and can be attached on the upper side with two screws at the 5 mm wide wholes.
I printed it with PLA, with the upper side on the print bed. In this case I needed less support material and got a nice surface.