HTC Vive HMD Wall Mount Lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not so much a remix really as a recreation using http://www.thingiverse.com/thing:1619580 as a template.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 347
- Wydruki
- 6
- Wyświetlenia
- 1397
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not so much a remix really as a recreation using http://www.thingiverse.com/thing:1619580 as a template.
I made it a little bit tighter because I had the feeling that with a bit of flex the headset could perhaps push the arms aside and fall out. Also added a slight indentation in the left arm to prevent the system button from being pressed while mounted.
This object can be used as part of my All-In-One HTC Vive Mount HMD + Controllers + charging mounting solution where you'll need only 3 screws to fasten the entire thing to the wall instead of the 6 needed if you mount every piece separately.
Print instructions
Printer Brand: Prusa
Printer: Prusa i3 MK2
Rafts: No
Supports: No
Resolution: 0.20
Infill: 20%
Notes:
Printed perfectly in PLA using Prusa's default NORMAL settings (with ZHop).
Post-Printing
There are 3 holes for mounting the bracket to the wall. For stand-alone mounting just use the outer 2 holes.
If used as part of my All-In-One HTC Vive Mount HMD + Controllers + charging mounting solution then you only need to use the center hole.