1 / 5
Remix: EZPass Toll Tag Holder w/Velcro Cutouts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix adds cutouts to accommodate the Velcro on the tag and removes useless side tabs.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 147
- Wydruki
- 3
- Wyświetlenia
- 783
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 6)Remiksy (1)Kolekcje (30)Powiązane
Some minor tweaks to jimerb's original design
- Added cutouts to accommodate the Velcro on the bottom.
- Removed the little tabs on the sides because they are very delicate and don't do much.
- I used these radar detector suction cups; they fit well and worked great. See the pictures for the dimensions.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
35
Filament:
Radio Shack :-) ABS White
Notes:
Use high temp plastic as your car probably gets hot in the sun.
Category: Automotive