Half size module for Tool Storage System (Brunos)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Expansion Module with the half size of a "Standard Module" (18 by 9 cm)
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This expansion module with a size of 18 by 9 cm gives you more flexibility for the storage system (Brunos) .
Each module is secured to a surface with up to two screws. Unused openings can be covered with caps. The modules are connected to each other using a concealed clamping piece (connector), allowing them to be assembled into a custom overall size.
For more informations about the wallmounted toolholder please have a look on my other models.
No support material is needed for the prints. I have printed all models in PETG and developed them with Fusion 360.