Simsonn Pedals Brake 50mm Shaker / Actuator / Resonance Speaker Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by: https://www.printables.com/model/660092-sim-jack-pro-pedal-speaker-mount Adapter to mount 50mm Resonance…
- Ocena
- 4 / 5
- Polubienia
- 11
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 947
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by: https://www.printables.com/model/660092-sim-jack-pro-pedal-speaker-mount
Adapter to mount 50mm Resonance Speaker to the Simsonn Pedals Brake.
I assumed Simsonn Pedals were more or less the same as the Sim Jack Pro Pedals, turns out, they are not and none of the mounting solutions for the Sim Jack Pro Pedals really work.
I have therefore redesinged a mount I found for the Sim Jacks to fit the Simsonn Pedals.
Use M5x8 or M5x10 flat head screw with a washer to mount the speaker to the adapter. Use screws and nuts that came with your pedals, just make sure to fully insert the nuts into the adapter before mounting, otherwise the screw wouldn't reach the nut.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament: Bavaria PETG Black
Notes:
Printed with 8 Perimeters and 30% Gyroid Infill






Category: Video Games