1 / 3
Prusa Mini Z-axis support with XZ skew stiffness
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified this model to add support for the XZ skew the MINI suffers and there is not procedure on the official manual.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
With this mod I changed the printing orientation therefore the angled surface is flat now.
This model will require minimum supports since it has many angles now, enable support on build plate only and reduce the overhang threshold to 30deg. I recommend to use organic supports, they require less filament and reach more points on the model.