1 / 5
WLToys 124007 / 124017 – fenders (mudguards) for rear suspensions arms
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
keep (some) dirt away from rear suspension & drive shafts
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
These fenders were designed to be printed in ABS-like resin. Pre-supported files included.
Find also threaded versions and a 3mf file with suggested print settings (from the prototypes, PETG) attached to be used on FDM printers.
Assembly
Tap a M4 thread to the though-hole. Take a M4x10 threaded bolt to bolt the fender to the suspension arm. Use a flat head bolt for minimal impact on ground clearance.