Basket/Can sixSwirl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
With this can the sixSwirl series started its way. Print in any size and cut at any height if needed, I use them to hold some small things or print garbage and so on.
There is also a Plant-Pot available in the same design:
https://www.prusaprinters.org/prints/75927-plant-pot-planter-sixswirl
Smaller ones I print in 0.2 layer height and with 2 or 3 walls (depends on material, ABS is stiffer so more walls to make them in structure more stable, CPE/PETG is more flexible there are 2 walls enough). Bigger ones I print with 0.3 layer height to increase speed. I also print them with rafts 3-4mm but I'm not printing with PLA.
Print Settings
Layer-height: 0.20mm
Rafts: Yes
Supports: No
Infill: 15 - 20%