1 / 1
Roomba power supply docking station
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can use to store the power supply attached to the Roomba docking station w/o having it interfering with the robot.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I just needed a way to conveniently store the chunky Roomba power supply unit, as it often interfered with the robot when the poor thing needed to get back home and recharge.
This organizer slides from the top of the Roomba docking station and sits above it. In order to have it attached to the docking station firmlier, you can put some rubber inside the brackets (I used some bike tube I had around). The power supply just slides onto the top vane.
Print parameters:
- Printer: Prusa MK3S
- Material: Overture PLA
- Resolution: 0.3
- Perimeters: 2
- Infill: 20% adaptive cubic
- Rafts: no
- Supports: yes (organic)
- Printing time: ~6:30