1 / 3
Diamond mold form (two parts) for pendants with fimo/sand/etc
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just put the two parts together and fill it with the material you want
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
you can scale it as you like. recommended settings are 0.1 layer, 30%infill, no supports.
just put the two parts together and fill it with epoxy/silicone/... should be not too hot if you use PLA, i recommend using soap or oil so it drops out easy after drying
Category: Jewelry