1 / 4
30mm 40mm 60mm 3.75" and 6" figure base plate/ stand — zdjęcie 1
1 / 4

30mm 40mm 60mm 3.75" and 6" figure base plate/ stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Star wars, action force, gi joe 3.75" and 6" figure stands

Ocena
5 / 5
Polubienia
24
Pobrania
294
Wydruki
2
Wyświetlenia
1645
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My brother needed a stand for his action force figure ( also fits star wars figures) so I made one like the originals except its totally flat on the bottom not indented.

I would point out that resin printing will be stronger for the peg as it snaps off too easy for my liking when filament printing.

I have also done a pegless version with a 1.75mm hole (3mm for the largest base) which you can just glue some filament (leave 2-3mm sticking out for the peg) which I feel give a stronger peg or you can use brass rod instead if you prefer.