Stackable Canned Food Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model for a stackable canned food organizer.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 581
- Wydruki
- 2
- Wyświetlenia
- 2453
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
This is a model for a stackable canned food organizer. It was designed to fit four 86 mm radius by 117 mm height. It has a slight incline which pushes the next can to the front and a lip which stopes it there.
It was too large to print in one piece in my printer, so I split it into two models, front and back. I've glued these together after printing. I've printed it both in PETG and PLA with 10% fill and they are fairly strong.
If the shelve you're placing it on is not level, you can help things by glueing rubber feet to the bottom most organizer.
Here is the original Fusion 3D model: https://a360.co/3ECl64s