K1 Max exhaust port adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed and printed this to be used with ABS Carbon Fiber. However once, used...you can leave it connected or remove.
- Ocena
- 4,5 / 5
- Polubienia
- 45
- Pobrania
- 264
- Wydruki
- 2
- Wyświetlenia
- 1376
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The exhaust port adaptor fits within the 95 mm (3.75") spacing at the back of the printer.
The round end is good for North American Dryer ducting, which is 100mm/4 inches.
I have also included the object file from Fusion 360 ,so you may modify it if you wish.
It is best to have top ventilation open as well, in order to allow some fresh air to enter the cabinet.
I would not recommend having a large fan on this circuit, as cold air entering the cabinet might affect the print quality.
The stock mickey mouse fan should be just fine for the job.