MiSTer FPGA and USB Mini ITX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an ITX adapter for the MiSTer FPGA, with space for the USB hub. There are holes to mount either closer or…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 1843
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is an ITX adapter for the MiSTer FPGA, with space for the USB hub. There are holes to mount either closer or further away from the back of the case.
I designed this to drop into a MyRetroComputer My64 Case https://myretrocomputer.com/ and it's an extremely tight fit. I'm not sure how well it works in other cases.
My other design at https://www.prusaprinters.org/print/75978/ is also intended for this case.
It could use some more work. The screws just drop down from the MiSTer components into the board, I didn't add holes for nuts to screw in to.
I was inspired by https://www.thingiverse.com/thing:4738986 which might be a better solution for most people out there.