1 / 3
Lack Camera Mount for Articulating Raspberry Pi Camera
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliding camera mount for Lack enclosure, compatible with the Raspberry Pi Articulating Camera connector system.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
No screws needed. Included 90-degree female-to-male adapter for convenience.
Prints nicely at 0.2mm using PLA or PETG.
No supports needed for backplate or screw, but the actual connection point needs some tree supports.
