Team Associated B7 Rollbar Collar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rollbar Collar for the new B7, the prices Team Associated charge for these little bits of blue is quite staggering so…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Rollbar Collar for the new B7, the prices Team Associated charge for these little bits of blue is quite staggering so if you lose one or just dont wanna buy, then download these.
Theres a big and small for bigger and smaller rear rollbars, the inner diameter is 1.3mm for small and 1.5mm for big but in my testing, the 1.5mm was pretty snug on my 1.3mm rollbar so you may need to slightly drill. Ideally you want the bar to be fairly snug.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
Supports:
No
Resolution:
0.1
Notes:
Can probably use PLA if not in a hot environment, but if so use PETG or ABS. A firm TPU may work? didnt try.
Category: R/C Vehicles