15mL or 50mL Adjustable Conical Test Tube Balance Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adjustable stand intended for use in a laboratory setting in order to tare out a test tube and mass sample.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This model consists of 3 pieces: a base, a heavier and more durable base, and the arms.
Arms and base can both be printed at 0.2mm layer height, no supports, in PLA or PETG. I would recommend PETG if they will be used around any type of chemical, as it is significantly more resistant than PLA (Prusa Polymers Team, 2021).
Orient base so that it sits upside down on the printbed. Orient durable base so that it sits right side up. Orient arms so they lay on bed lengthwise. Printing vertically would significantly weaken durability in the most important direction, and they were designed to print horizontally.