Flash/Strobe Gel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds color gels for you 7" reflector
- Ocena
- 1 / 5
- Polubienia
- 8
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was tired of clamping giant gels to my lights. I made this adapter that presses into a 7" reflector. You simply cut down a Gel Sheet to 176mm and slid into place. Multiple sheets of gels can be inserted at the same time to alter color tone or intensity.
I printed with PLA as the lights i use do not get hot. However may old style bulbs do, so PETG maybe the better choice in those cases. The support tabs are thin, so take care when removing support structure after print.
If you have any suggestion to improvements please let me know.
V1: shown with blue gel, must be printed vertically with supports. It hold the slightl better but takes longer to print.
V2: shown with red gel, may be printed flat with supports.
Link to Bowens Mount Reflector: https://a.co/d/3mHDDjh