Loving Hands heart pendant with box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a loving pendant based on a 3D scan of my hands forming a heart shape including a Print in Place box
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 80
- Wydruki
- 2
- Wyświetlenia
- 611
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a pendant I designed for my girlfriends birthday, consisting of two hands forming a heart shape when hung upside down on a necklace.
I created the 3D scan using photogrammetry based on hundreds of photo's keeping my hands as still as possible. The scan required a lot of cleanup for which I used a blend of Meshmixer, Tinkercad, Sculptris and Prusaslicer.
I designed the hands to be printed in metal using SLM technology, that's why I have one model with a solid base and a spruce. I have also added a clean version for SLA and one with a flat base for FDM printing.
The pendant in the photos (size S) was printed by JLCPCB in stainless steel and is holding up very well. I have drafted one in PLA (0,24mm layer height, which might be too weak for daily use) and I added a clean model for SLA which should be strong enough depending on the material.
I also designed a box that perfectly fits the S size pendant which can be printed in place without supports. There are also two holes in the standard version in which you can press 4*4mm cylindrical magnets but these are not necessary for it to function.
I've also added a size L at 148% scale, if you want a box for this one you should scale the box up. I ordered both at JLCPCB but the small one was the nicest shape but the big one prints easier with FDM (although still not easy)