Powder Trickler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Powder trickler for precision reloading of ammunition
- Ocena
- 4,667 / 5
- Polubienia
- 98
- Pobrania
- 1229
- Wydruki
- 7
- Wyświetlenia
- 4439
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I modified the Powder Trickler by Nick van Noordwyk, to add a cap to the bottom. That made it easy to add some weight for stability. Nick graciously provided his Fusion 360 project file, which made it super-easy to make changes to it.
The tube does not fit the holes made for it straight off the printer. No surprise there, really. I reamed out the holes by hand with a 27/64" bit, and then the tube fit right in very snug, but would still turn freely. The exact bit to use will depend on your printer.
After installing the tube, use a marker to mark a spot in the center of the tube inside the hopper. Remove the tube, and drill a hole in that spot. The size/shape of the hole will depend on what powder you're using. You can print multiple tubes for different powders, if necessary. I drilled a 4mm hole, which seems to work well for IMR4895 rifle powder.
I filled the base of the trickler with #8 bird shot, and attached the bottom cap with hot-melt glue. The extra weight gives the trickler good stability to operate it with one hand.