1 / 1
BentoBox v2.0 Fan Duct for 3030 extrusion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BentoBox v2.0 fan duct for 3030 extrusion
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Needed an air scrubber for my RatRig VCore 2.1. The BentoBox looked like a well thought solution. To make it fit I removed the original bolt holes and added two new ones further in the back for M6 bolt, so the back of the box is flush with the extrusion.
On the picture I bolted it on a left over piece with a 90° bracket.