Simple Shower Basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple shower basket with drainage holes and pointy rails so the water can not stay on top of the rails
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple shower basket with drainage holes and pointy rails so the water can not stay on top of the rails. We had one made out of wood, but it startet to rot.
Measurements inside: 155mm x 220mm x 50mm (hight)
Measurements outside: 175mm x 240mm x 60mm (hight)
Wall- and railthikness 10mm
I designt it so the the water can not stay on the edges. Just put some small rubber feet on the bottom so the water can flow away.
I Printed it with PLA, 15% infill, 4 Walls so its more likely to be waterproof, and a brim on the outside. It fits perfect on the Bambu Lab X1C.
We just started to use it, I'm not sure if PLA is the right choice. If you print it with PET, it could be better.