1 / 4
Sewing Kit Box with Living Hinge and Magnetic Closure for Fiskar's Sewing Kit — zdjęcie 1
1 / 4

Sewing Kit Box with Living Hinge and Magnetic Closure for Fiskar's Sewing Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sewing kit case for up to 12 spools along with a magnetic needle compartment and small pincushion.

Ocena
0 / 5
Polubienia
20
Pobrania
80
Wydruki
0
Wyświetlenia
553
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

This case stores the contents of a Fiskar's sewing kit (up to 12 spools) and features a magnetic closure. The pin cushion is created by folding a paper towel or square of microfiber cloth and tucking it into the rear slot.

You will need 5 magnets with 10mm diameter and 3mm thickness. When printing at 0.20mm layer height, insert pauses at the start of layers 47 and 67 so that you can insert magnets. Make sure to orient them correctly so opposing sides attract as the case is closed.

There are two stls provided: one which includes a multi-material ruler design, and one which does not. If you plan to use the ruler design, you will need to use the color fill tool in your slicer; the pattern is very slightly embossed so it can be recognized by the fill tool.

The parametric source design file can be used to adjust the number of compartments, magnet dimensions or even change the ruler depth to support color change at a given layer. However, the living hinge pattern may need to be extended if the case dimensions are changed.

Tagi