*Apple AirTag Keyring Case Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a AirTag holder that is print in place. No assembly required! It is designed using an AirTag model based upon…
- Ocena
- 3,4 / 5
- Polubienia
- 126
- Pobrania
- 2357
- Wydruki
- 4
- Wyświetlenia
- 12 122
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
This is a AirTag holder that is print in place. No assembly required! It is designed using an AirTag model based upon Apple's dimensions of 31.9mm X 8mm and photos available since the announcement.
This has been successfully printed and tested using a 0.1mm layer height. A 0.15mm layer height should also work, but I expect that a 0.2mm layer height could prevent the hinge from working.
For a more refined AirTag keyring case, check out my AirTag Twist-Lock keyring case on MyMiniFactory:
https://www.myminifactory.com/object/3d-print-airtag-keyring-twist-lock-case-167136
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
0.1mm or 1.5mm
Infill:
30
Filament:
ANY PETG ANY
Category: Keychains