DJEEP Lighter cover - Paint your own!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A DJEEP lighter cover prepared for multimaterial printing and personalization
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A DJEEP lighter cover prepared for multimaterial printing and personalization utilizing the new paint on materials in the new PrusaSlicer 2.4.0 alpha build.
Download the newest PrusaSlicer alpha build and use the material paint mode, to make your very own reusable DJEEP lighter cover.
The 3MF file should already have the neccesary settings for printing this, but in case it doesn't “detect thin walls” is absolutely a requirement.
Note: If you dont have a multi material printer you can still use this to make a textured lighter with your own motif - Although it is a bit more complicated:
Disable wipe tower. Export the G-code for multimaterial. With a text editor such as notepad++ or vscode, remove all tool change lines (T0, T1, T2 etc). Load onto SD card. Happy printing :)
PrusaSlicer Alpha build:
https://github.com/prusa3d/PrusaSlicer/releases