Parametric Configurable Pegs for Honeycomb Storage Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your own long tall short fat pegs via configurable length and girth. Use 'em for anything!
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 312
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Another component that works with RostaP's Honeycomb Storage Wall.
This is a FreeCAD model that creates hexagonal insert pegs, and you decide the length and girth. If you need a long peg, a short peg, a skinny peg, a fat peg – you're covered. Simply specify in the attached “Parameters” spreadsheet:
…And the parametric functions do the rest.
Input of insane values will produce insane results. I can't save you from yourself.
Well, I could. But I won't. This will obviously also require you to have a copy of FreeCAD to mess with it.
Each peg has a small upturn at the end to keep things from sliding off. The customizable parameters make these perfect for tailor made storage of keys, rings, cables, headphones, watches, hang cards, lanyards, hopes, dreams, etc.
Each peg will slot into an “insert, empty” from the Honeycomb Storage Wall files. You can glue them in, or not. Your choice.