Scorpion EVO/PSA AKV Wall Mount Magazine Holder (5 Magazine Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mountable magazine rack/holder for PSA AKV or Scorpion EVO 9mm magazines. This is the 5 magazine variant.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I would recommend 100% infill with 4+ walls and 0.2mm layer height if inexperienced, otherwise feel free to tweak this to save time and plastic. These hold magazines, so if the model breaks, worst case the items falling are meant to be dropped during use anyway. At 100% infill with 4 or more walls, it should be quite sturdy.
You'll notice in the file pack that there are 3 choices for the body of the magazine holder (with 5 models total for the bodies)
With Plate Space: This model has a gap for a 2mm thick plate to be installed in the front. This allows you to neatly display information about the magazines, if you want. The plates are included in the Display Plates folder in the pack, and allow you to print them flat with the text facing upward, to add a distinctive color change.
Embossed: For those who want simplicity, or don't care for the color change, embossed models feature the 3 plate text options, but imprinted 2mm into the front face of the magazine holder. Sometimes simple is better!
Plain: For those who don't want text at all, want these mounts to match other plain mag holders on their wall, or who want to customize the model themselves, the plain model is simply the magazine holder with no added text or plate space.
Please check out my other models for other sizes! I also created a 10, 4, 3, 2 and even 1 magazine wall mount holder.