Sheetholder stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You only need one Steun_x part.
Steun_N for mounting on the left, this uses the sheetholder printed in the normal manner, mounted to the left of the enclosure (buttons down)
Steun_M is mirrored: needed for mirrored sheetholder parts, mounted to let right of the enclosure, but with the buttons down (the normal model would have the buttons up).
You cannot easily mirror in the slicer, as the model contains threads, and you cannot buy a left hand threaded rod easily….. The original sheetholder itself can be mirrored.
Steun_x needs supports. I used organic support on the buildplate. They break of easily and the supported thread worked without any reworking.
Kap and Voet do not need supports. It uses a metal M8 rod of 100mm length (or less if desired you can adjust over more than 20mm)