1 / 2
Trindet Power Inlet 42×27 mm with 50 mm spaced mounting holes — zdjęcie 1
1 / 2

Trindet Power Inlet 42×27 mm with 50 mm spaced mounting holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of power inlet skirt panel, to fit the power inlet with power switch I happened to have and wanted to use.

Ocena
0 / 5
Polubienia
2
Pobrania
22
Wydruki
0
Wyświetlenia
134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Voron Trident skirt option  to fit the Shurter 4302.2001 and other inlet options with 50mm spaced m3 mounting holes.

Use washers and nuts, this model is not designed to fit heatset inserts as the forces when plugging and unplugging cable were too high for heatsets in my testing. If you want to remix it to fit the inserts, enlarge the holes on the back of the skirt and insert them from the back, so that there's some plastic preventing inserts from being pulled out when unplugging cable. It can be done, I just can't recommend it now and I refuse to waste more plastic and time on testing this.

My print file is for time and material reference only. Slice it on your own, please.

⚠ WARNING this inlet has no fuse in it. Be sure to add fuse inside of your electronics bay if you use it. I take no responsibility for you running your printer without a fuse.

Tagi