1 / 4
Universal 20x20mm T-slot Filament Spool Stand|Mount|Holder — zdjęcie 1
1 / 4

Universal 20x20mm T-slot Filament Spool Stand|Mount|Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament Holder that allows a rapid change of filament and prevents spool wobbling.

Ocena
0 / 5
Polubienia
6
Pobrania
29
Wydruki
0
Wyświetlenia
298
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Hello!

I designed this piece in order to be able to change the filament spools easily and in the same time I wanted to have a holder that secures the spool and it doesn't allow it to wobble.

Additionally to the 3D printed parts you will need:
1 x M8x120mm Hex Bolt
1 x M8 Nut (13x15x4)(s x e x m)
2 x 608-2Z Bearing (8x22x7)
4 x M4 T Nuts
4 x M4x8mm Socket Button Screw

Pay attention to the "NUT END.3mf" file! You have to pause the print at a specific layer height to insert the nut into the print, then resume the print.

I recomand you using supports when you print:
TOWER STAND .3mf
HEADSCREW END.3mf
NUT END.3mf (make sure that you won't have a support in the nut hole)

 

Tagi