Globo/Martha Stealth Lamp Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows the typical low-cost Globo / Martha / NNN Lamps to mount right above a flush-type electrical box.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
This part allows to replace the stock mounting bracket which is just a bent piece of steel.
With the stock bracket, the Lamp has to be mounted next to the flush-type electrical box ("Unterputzdose" in german). This now allows mounting the lamp exactly on the box hiding all wires.
Both versions are for a 60mm spacing for the flush-type box. One is for a 76mm lamp base and the other one for a 83mm lamp base.
Please measure the diameter needed for your lamp before printing and if needed modify the file so it suits your need.
The holes need to be tapped with an M4 tap so the stock screws from the lamp fit.
FOR THE TWO PART ROTATING VERSION, YOU NEED TO USE THE FUNCTION SPLIT→OBJECTS IN PRUSA SLICER AND ALIGN THE TWO PARTS. THE STL INCLUDES THEM IN USAGE ORIENTATION INSTEAD OF PRINTING ORIENTATION.
Sources attached for customization:
76mm/Fixed Version: https://a360.co/3AnKvrJ
86mm/Rotating Version: https://a360.co/2XEduJI