Filament Clip for Fiberlogy Spool - Compatible with AMS System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Clip for Fiberlogy Spool - Compatible with AMS System
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 953
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ATTENTION - Filament clip version 1 is not compatible with AMS System
Hello Everyone
I designed two versions of the Filament Clip for Fiberlogy spools that can be permanently attached. Thanks to this, it is always at hand and attaching the filament is quick and easy with just one click. Filament clip version 1 is not compatible with AMS System because Fiberlogy spools are too narrow. Filament clip version 2 is compatible with AMS System but it cannot be used for a full spool because Fiberlogy winds the filament to the very edges of the spool. You need to use some filament to make assembly possible. For each spool I use 2pcs on the left and right side.
I have about 100 spools of Fiberlogy filaments and when assembling the Filament Clip version 2, I noticed that the spools were different from each other. This is probably due to different production dates and different forms. That's why I provide 3 sizes for the filament clip in version 2. The Standard version is the most universal.Filament Clip version 2 includes Logo. If you do not color it, the logo will not be printed.
When you complete the project, please share a photo and a comment. Thank you and have a nice day.
IMPORTANT - READ :
Please note that each printer is calibrated differently, has individual user settings, and each uses a different type and manufacturer of filaments. I tested the project on PLA filaments from Fiberlogy and PETG filaments from Bambu Lab. Each time the size after printing was perfect for the Filament Clip. If you decide to use the design, print one piece as a test to check the correct dimensions. One piece uses less than 2 grams of filament.
How To Print ? :
- Material : Any
- Layer Height : 0.2mm
- Infill : 20%
- Wall Loops : 2
- Bottom Layers : 3
- Top Layers : 3
- Support : No
- Brim : No
- Brim Auto : No (Be sure to disable Brim Auto. When printing in color Filament Clip For Fiberlogy Spool - AMS System.stl with Brim Auto on, it may cause a problem on the first layer)