1 / 2
Dual Color - Prusa Bear Y End Caps (No MMU) — zdjęcie 1
1 / 2

Dual Color - Prusa Bear Y End Caps (No MMU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A dual color upgrade to the Prusa Bear Y End Caps. Does not require MMU

Ocena
5 / 5
Polubienia
20
Pobrania
133
Wydruki
4
Wyświetlenia
703
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is a simple update to the Prusa Bear Y End Caps. 

 

I wanted them in dual color but don't have an MMU. Thanks to help from fuchsr, he helped me figure it out. I recommend using the Gcode since it's complicated to setup in Prusaslicer. 

 

Note if you use Octoprint it will complain a little bit about missing tools, but this is okay and part of the ‘trick’ needed to print in dual colors. 

 

You need to manually swap the filament 4 times. It does in the normal M600 filament swap way. The order is: 

  1. Accent Color
  2. Main Color
  3. Accent Color
  4. Main Color

Tagi