Reactive Target
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reactive Fall Away Target
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this reactive target and mounts to be used at the Maryland Nerf Herder Blaster Battles. They work for most stock and modded blasters. The base of the target is designed to fit into 1" PVC but I also added some other mounts that can be used with it.
Targets and frames are held together with 10x5x2mm bar magnets
The magnetic base uses 60 x 10 x 3 mm
The target can be printed in PLA at 10% infill with 2 walls and withstand most high powered shots from modified blasters.
I print the frames and bases at 20% infill and 2 walls.
The bases were all designed to be printed in TPU. I printed mine at 10% infill and 2 walls
All parts are printed without supports