Paperbag-Holder with swappable Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for Paperbags to be used in a Self-Service Shed for example.
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Standard Digital File License
This model consists of a total of four components: a holder, a cap (print two of them), a replaceable front panel, and corresponding connecting bolt (also print two of them).
Insert the bolts precisely into the designated recesses on the back of the front panel. If necessary, use an appropriate adhesive.
Pass a screwdriver through the front holes of the holder to secure it to the wall or a wooden surface using two M3.5 screws. M3 will also work.
If desired, conceal the screws with the provided caps.
Finally, simply attach the front panel to the two front holes.
To facilitate the removal of the front panel when needed, use a small slotted screwdriver to lever the panel off from below using the designated central slot.
Included in the purchase is a blank front panel. For your custom needs, you are allowed to, for example, engrave your logo there, provided that you do not distribute the modified file further.
If you require assistance with this process, please feel free to contact me.
Please note that the images may contain logos. These are for illustrative purposes only and are not part of this package.