Sprout farm on a vintage table scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sprout farm for scale pan of vintage table scale. A decorative solution to grow fresh sprouts in your kitchen.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I want to grow fresh sprouts to pimp the sandwiches my son takes to school every day.
So the idea came up, to use a vintage table scale as decorative sprout farm.
The main requirements were:
- The sprout farm should fit into the scale pan and allow some ventilation.
- The sprout farm should have 3 feet to allow ventilation
(this avoids corrosion of the brass scale pan) - The sieve needs an opening for water level check.
The opening also allows to take out the sieve without the need for extra handles. - A transparent/opaque cover with air ventilation
- Solid design to cope with daily use in a kitchen environment.
The sieve and top cover were printed with:
- Prusament Clear PETG
- no supports
- nozzle 0.4mm
- layer height 0.2mm
The bottom tray was printed with:
- Prusament Pistaccio Green PETG
- supports (Sunlu PLA+)
- nozzle 0.4mm
- layer height 0.2mm
Problem:
I had some issues with my MMU2S while printing, so the feet broke off and had to be glued back on again.
Solved:
a) Increasing the flush volume PLA→PETG to 700
b) Supports with PETG + PLA only as interfacing layers
I just started the first round of growing sprouts today… I'll keep you updated.
There are two versions:
Version 00:
150mm diameter, modern decor of air inlet
Version 10+11:
160mm diameter, flower decor of air inlet