AEG dishwasher tray wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
wheel for old aeg machine, didnt found it, so make my own, axle on the other side is from HoneyBaddger
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 373
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I have printed it from (cheap) PETG for better heat stability, dont think PLA will survive longer periods without deformities, used satin plate and some Kores glue, printed well on 140 % speed on my mk3, with brim and suports on plate
Made in Fusion, it was fun to use angled slots and patterns. If you need some edit of the modell, let me know.
Axle had to print on bit less than 100% to me (i think 95-96 i dont remember exactly), just to add some space to rotate wheel freely and to snap to dishwasher basket wire firmly at the sme time. Make some prototype according your print material.