goofy hand axe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
pretty silly little hand axe I made. it's supposed to be from the roblox game guts & blackpowder, but it ain't so good.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
what is this
it's a sad attempt to make the guts & blackpowder hand axe. you may also call it the https://www.roblox.com/games/12334109280/Guts-Blackpowder hand axe. i, with my little knowledge of good modeling, modeled this in roblox with unions and negativeparts. i don't know who exactly made the original model for the in-game hand axe, but credits to them. i made this for fun.
print tips
i printed mine with silver and walnut wood filament, but if you want it to look accurate, you might want a slightly lighter and dirtier wood color. you also may want to print the blade in a darker gray and paint the tip silver. here's what you should put your settings to:
- supports only touching hotbed
- brim or raft for handles and cap
- personal settings for everything else
i made this with a 220 x 220 mm print bed, so i don't know what you can do besides split it even more if your print bed is smaller. i used pla, but feel free to choose whatever you want. personally, i printed mine with brims, supports touching the print bed, 30% triangle infill, 220°C for the nozzle heat, and 70°C for the print bed heat.
post-print tips
DON'T SWING IT TOO HARD. use any glue you want to put it together. i used hot glue. the goofy stick thingies so the parts to connect probably will break, so that sucks. the cap will need heavy sanding. the blade is very loose, so be careful to make sure that it is centered when you put it on. don't actually use it. it will chip.