Sternenfahrer von Catan - Ersatz Treibstoff Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
1,19 € – 1,45 € netto (bez VAT)
Dla pliku: Sternenfahrer Ring (gcode) / sternenfahrer-ring_01mm_petg_mk3s_1h50m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,32 € netto (środek widełek).
- Masa podana przez autora
- 6 g
- Czas druku podany przez autora
- 1,84 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Designed for the 1st generation rockets of "Die Sternenfahrer von Catan" von Cosmos. Brim and support on build plate…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 625
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for the 1st generation rockets of "Die Sternenfahrer von Catan" von Cosmos.
Brim and support on build plate only are required.
The replacement ring require to remove the existing (often broken) boosters' fixations. I did use a little bur with a Dremel.
The ring is open (you may have to separate it with a cutter), this allow to slide the ring from the top of the rocket.
The ring is than glued on the rocket.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
200
Infill:
30
Filament:
3D Jake PETG Bronze
Category: Toy & Game Accessories