Tefifon HS Mounting Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting rack for the German Tefi HS "Schallbandgerät", which is very helpful when working on the chassis.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When restoring old Tefifon units I found it very difficult to work on the chassis without damaging the delicate parts of the device. So I designed this simply mounting rack.
Simply print 4 corners (2 of each kind, PETG, 0.3mm layer height), get a 354mm x 259mm plate and mount the corners with 12 pcs 3mm … 3,5mm countersunk screws. The outermost screws must be mounted at a distance of 301mm / 205mm to exactly match the size of the device:
You also might want to add rubber feet in original Tefifon design to the bottom:
Design and Source Code
The corners have been designed using OpenSCAD. I have provided the source code for download, so you can adjust the design to your needs.
Happy printing!
If you like this design, then please leave a like and also post a photo in the comments.
Looking for more Tefifon related stuff? Have a look at my Tefifion collection.
You might also want to check out my other designs.