Voron 2.4 Increased Z/Tilted Cable Chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Cable Chain mount for Voron 2.4 to get more z-travel
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 1530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was previously only able to get a maximum of around 310mm Z-travel out of my Voron 350 because the cable chain hit the frame at the top of the printer. This annoyed me and was an issue for some of the larger parts I print, so I moved the cable chain. Now I can get around 340mm out of it.
Print both parts contained in the .STL file. 1 part for either end of the Y-axis drag chain.
I was able to replace the stock y-axis drag chain mount, and add the wedge block, without having to change any of the wiring
Make sure your end stops still trigger properly after installation