1 / 4
Ender 3 Neo Dual Fan Duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual Fan Duct for the Ender 3 Neo
- Ocena
- 4,75 / 5
- Polubienia
- 59
- Pobrania
- 442
- Wydruki
- 6
- Wyświetlenia
- 1842
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 15)Remiksy (1)Kolekcje (64)Powiązane
Been looking around a while for a better fan duct for my Ender 3 Neo, but no one really seems to have made any. Finally built up the motivation to do it myself. Using the model made by Geazzes walking of the single fan duct, I was able to put this one together. It's most definitely not perfect, but it seems to do the trick.
Print settings:
- Filament: PETG recommended (PLA works fine but does seem to warp over time)
- Nozzle: 0.5mm (but could just as well be done with a 0.4mm nozzle)
- Layer height: 0.15mm
- Supports: Yes - tree/organic is what I used and it worked well
- Brim: None
- Print oriented on the long flat side
Notes:
I don't know if this will fit with the stock fan shroud, but if you are interested I am using this one by Ihor Pomaranskyy