X-Carve Dust Shoe - 65mm router
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dust shoe for CNC routers with a 65mm shaft with detachable brush base and upper hose support.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I made this for my X-Carve clone which has a Makita palm router which is 65mm. Based on many other such designs, this one has more magnets (6mm) and a brim that helps to prevent the bottom from dislodging with any sideways pressure. The clamp uses m4 screws.
The lower portion has a groove for placing “Dust shoe brush” which can be purchased from Amazon etc. There are holes in the side for screwing a short wood screw through to hold the brush in.
Please be careful of any clearance issues with the Z axis lower bearing housing. I have had to make adjustments for my own machine and the Fusion360 file is attached for you to adjust as needed. This version is in the attached remix.
Enjoy.