RETIRED - print at own risk - Seed root trainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this model has proven tolerence and strength issues, print at your own risk and use as a base for your own improvements
- Ocena
- 4 / 5
- Polubienia
- 34
- Pobrania
- 171
- Wydruki
- 1
- Wyświetlenia
- 935
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
THIS MODEL HAS TOLERANCE AND PRINTING ISSUES
It's been brought to my attention that the model has problems in printing and some of the parts our out of scale to fit correctly when working with printer tolerances, because of this i've decided to edit the entry to show this risk factor.
if you still print this then the recommendation would be to use it as a test and look at ways of improving it, i no longer have the source files to edit and fix them.
recommended to be printed with 4 walls
This is print in place.
To open i've found it best to pop the hinge a bit then open, if you open from the top without this first step the hinge risks breaking off.
Print 3 of the root trainers and two side clamps, this creates a 1x3 stable platform, print another 3 trainers for 2x3, keep repeating to build the amount you want.
You may want to play with the tolorences on the clamps, but once packed with compost it should be fine in either orientation.
Update:
I've included a version which has drainage holes in the lower half to allow it to be watered from the bottom up